Quadra Mono
The modular stand with panels made of rigid material
Technique and material for panels made of rigid ultra-lightweight
The portable panel exhibition stand.
The Quadra Mono modular panel stand strikes an excellent balance between the Omni series and the Quadra Kube. Designed and manufactured entirely in Italy, it has been refined and engineered over the years, improving both its aesthetic and functional qualities.
It is, in fact, thanks to its ease of use and straightforward construction that this system is highly valued by companies seeking a practical and quick solution for participating in trade fairs.
Consisting of a floor-standing unit and rigid panels, it is modular and can be arranged both vertically and horizontally.
The stand has a maximum height of 300 cm and is modular in 100 cm and 50 cm increments: this means exhibition stands can be created in a variety of heights, including 200 cm, 250 cm and 300 cm. The stand is fitted with a base featuring adjustable holes, allowing for a range of uses – whether at the end of a stand, in a central position or in a corner – without wasting valuable space
The panels can be of various sizes: 100×50 cm, 100×100 cm and of all the other sizes that best can help you with the creation of the modular stand.
This exhibition stand model is ideal if the space to be fitted out is small, as it is only 7 cm deep, or if you don’t want to waste any space on the stand.
Style and design that are unmistakable
Technical and high-tech design. White-painted base and vertical tubular frame with an anodised aluminium finish. The structure of the exhibition stand is completely concealed by the graphic cladding, giving it a clean, understated and innovative look.
The design makes a strong visual impact and is highly distinctive thanks to the four buttons, available in a range of colours, which create a recognisable and technical visual element. The only visible part of the structure is the white steel base, with rounded corners that appear smooth to the eye.
Ideal for all product categories and all sectors where communication is important and the number of events is frequent.
Thanks to the latest upgrade in 2018, the end panel of the exhibition stand is also well-finished and makes a strong visual impact: by inserting the corner profile, it is possible to attach a thick panel to the corner, creating a seamless and aesthetically pleasing wall.
Fully modular and customisable with panels
Modularity Quadra mono and Step construction
By combining floor stands and cladding panels, you can easily and intuitively create a variety of construction stages.
width 100 cm and height 200 cm
width 100 cm and height 250 cm
width 100 cm and height 300 cm
The ‘Step’ refers to the sequence of steps involved in assembling the stand, and it is important to choose the right one as it is always linked to the transport and packaging of the individual components. If I want to transport the stand by car, it is best to use smaller components; conversely, if transport is planned for vans.
The cladding panels can be adjusted in height and combined as desired: I can, in fact, create a 300 cm high wall in the following ways:
50+100+100+50 or 100+100+100 or 100+50+50+100, and in many other configurations. This is useful for adding visual interest to the modular stand’s design or for making full use of the panel display space, which is typically between 100 and 200 cm in height.
For the correct choice of construction step, we recommend consulting a Fastand expert or viewing the page dedicated to the photo gallery.
Quadra Mono modularity
Easy to assemble yet featuring a sophisticated design: the tubular sections of the floor lamp can be quickly screwed together, whilst the base is secured with Allen screws (Allen key supplied) for maximum stability.
Quick-fit rings with a plate: pre-assembled and quick to fit.
With an estimated setup time of just a few minutes per module and minimal wear and tear on the components, the Quadra Mono stand system is a reliable companion for all the trade fairs you attend.
Ideal for all inexperienced users because it is easy to assemble and very intuitive. Assembly diagrams as shown in the figure are included in all transport packages.
The Quadra Mono series comes in a case.
Every element is in a case.
All system modules are in kits and are stored in a special hard case.
Upright Kit: 2 Pcs in case 100x6x53 cm
100 cm Beam Kit: 3 Pcs in case 100x6x53 cm
100 cm End Kit: 6 pieces in a case measuring 118x25x8 cm
50 cm End Kit: 12 pieces in a case measuring 78x25x8 cm
Set of panels measuring 100×50 cm: 6 pieces in a case measuring 100x53x6 cm
Set of panels measuring 100×100 cm: 6 pieces in a case measuring 100x100x10 cm
For panels of other sizes, we can produce custom-made cases.
The case allows perfect movement of the kits, perfect maintenance of the pieces against scratches and breakage, and maximum protection during transport.
Organize and make the most of your trade show space
Let’s start with the layout of the modular panel-based stand.
As shown in the diagram, various types of stands can be created using standard modules from the Quadra Mono exhibition stand.
As shown in the figure, the display system can adopt different floor plans always using the same modules, to offer maximum modularity in all types of different trade show spaces.
Thanks to this system, taking part in a trade fair will no longer be a problem, either in terms of time or space, as it adapts perfectly and with great ease to any situation.
Adjustable to create the shape you prefer
Orient the display system and add movement.
You could opt for a curved stand to create a more eye-catching design, or to incorporate hidden spaces such as a storage cupboard or storeroom.
Choose the finish best suited to your Quadra Mono modular stand
Flooring recommended
Below are the types of material available for cladding the system, available both with printed graphics and plain in white colour,
A. Sandwich
10 mm sandwich panel, available in matt white or with direct UV printing. A highly flat panel that does not warp or bulge, comprising three distinct layers: 1 mm PVC on both sides and an 8 mm high-density polystyrene core. Ideal for its lightness (weighing just 200 g per square metre) and compactness. The direct UV printing is of the highest quality and the best in its class. It is the most commonly used option for the Quadra series due to its excellent value for money.
B. PVC
C. MULTILAYER BILAMINATE
D. MICROWAVE
E. PLEXIGLASS
