VeloReplica

• Innovative and futuristic design shell
• Lowered shell of only 6 cm
• Highest level stylistic finishes
• Patented Fastbrake* System banner braking system
• Patented spring system
• 3-piece modular aluminum pole with 19mm diameter
• Pre-assembled elasticized pole
• No support feet
• Upper banner mounting with fixed pole, not clip but velcro
• Banner interchangeable by anyone in a few steps
• PVC covering with custom printing from your file
• Innovative pole transport system, in the under-shell
• Innovative rubber upper pole end fixed by pressure
• Valigia di trasporto
• Allestimento senza utensili
• Rapido montaggio di pochi minuti

We wanted to create a new design for our roll-up. Aesthetically compact and clean, it gives an impact of strength but also lightness and modernity. There are no visible screws, which makes it essential and futuristic.

Fastand’s Fastbrake* system, a world-unique revolution in the roll-up banner Display sector.

You can close and open it with great ease and this will allow you to do many things, which you can read in the next section. The lock is inserted inside the roll-up and locking occurs via a knob on its surface. By moving the pin forward and backward and locking, you determine whether or not the spring functions. The spring is in fact inserted inside the compartment and allows the roll-up to retract.

With this system you decide when the spring should come into operation, and if not needed, you can manage and stop it with a simple click.

Thanks to this innovative idea you will no longer have the classic twisted effect of the banner, which makes it really unsightly. A properly tensioned banner will in fact be perfect, while an over-tensioned banner will crumple on itself.

An indispensable tool to ensure perfect tension of the graphic banner, protect the springs during transport and decide the panel inclination.

An intelligent system, FastBrake* System.

You can do 4 very useful things:

1. For changing the graphic of your Velo roll-up banner. Stop the spring lock to insert or replace the graphic banner, essential and easy to replace the banner and give new life to Velo. By locking the Fastbrake* you can easily remove the old print and insert a new one.
2. During an event. Tilt and tension the graphic banner as desired with a simple movement of the support pole and consequently lock the Fastbrake. The inclination of the graphic banner will be modified and your roll-up banner will be perfect.
3. During the opening of the roll-up banner, by closing the system you ensure that the spring loses its function and does not distort the graphic. Locking the Fastbrake* system after opening the banner ensures that the spring force is reduced and that the roll-up position is kept constant throughout the period of use.
4. During transport. The spring lock will be preserved and will protect your roll-up for future events.

It contains, protects and is also beautiful to look at. Your Velo roll-up should be stored carefully because it is precious. That’s why its case is rigid and not soft.